Fascia Installation, Repair & Re-Capping in Mississauga & West GTA
Aluminum fascia installation, repair, and re-capping in Mississauga and across the West GTA — protecting the roof edge, supporting your eavestroughs, and sharpening curb appeal with colour-matched aluminum that lasts. Maxima Aluminum LTD has been serving the West GTA from Mississauga since 2002. Our crews repair damaged sections, replace rotted boards, and cap the roof edge for a clean, long-lasting finish. Fascia (sometimes misspelled “facia”) seals the edge of the roof — when boards turn soft, wavy, or exposed, moisture slips behind the trim and causes stains, rot, or pest entry. We serve Mississauga, Oakville, Burlington, Brampton, Milton, Vaughan, Etobicoke, North York, Caledon, and Georgetown.
Installed pricing — per linear foot, before HST
Aluminum fascia — installed
From $8 per linear foot installed. Typical range $8–$15/lf depending on aluminum cover over existing wood vs full-panel replacement with rot repair.
Minimum service call $300 (excl. HST). See full cost breakdown and site-condition factors below. Reviewed 2026-07-26.
Quick jump:
What we do ·
Why it matters ·
Installation ·
Repair ·
Cost ·
Areas served ·
Reviews ·
FAQ
What we do
Services at a glance
- Fascia installation and aluminum capping: Straight, level roofline detail with colour-matched aluminum wrap, custom-bent on site.
- Fascia repairs: Replace rotted wood, re-secure loose boards, smooth waves, and close gaps that let in water or pests.
- Re-capping: Fresh aluminum wrap over sound framing to refresh curb appeal and eliminate future painting on wood fascia.
- Coordinated upgrades: Clean transitions with soffit, eavestroughs, and aluminum cladding.
Planning a full exterior refresh? Our crews also install downspouts, Alu-Rex gutter guards, and siding. Combining fascia with soffit and eavestrough in one visit is often more efficient than separate contracts.
Why fascia work matters (and how it helps prevent ice dams)
Fascia does more than close in the eaves. It supports the eavestrough, seals the roof edge, and works hand-in-hand with soffit ventilation to reduce ice-dam risk. When fascia rots and gutters sag, water backs up at the eave. When ventilation is off, snow melts above and refreezes at the cold edge. The fix is not just cosmetic — it is structural protection through GTA freeze-thaw cycles.
Key benefits
- Protects the roof edge: Properly capped fascia shields framing from rain, wind, and ice.
- Supports your gutters: Solid, straight fascia helps eavestroughs stay aligned and properly sloped.
- Reduces ice-dam risk: Combined with vented soffit, balanced ventilation keeps the attic cold so snow does not refreeze at the cold roof edge.
- Reduces leaks and pests: Tight trim details cut down on water wicking and small wildlife entry through the soffit return.
- Improves curb appeal: Crisp lines and neat corners make the whole roofline look newer.
- Eliminates future painting: Aluminum cap over wood fascia means no more annual paint cycle.
Fascia installation and aluminum capping
Before quoting, we inspect the roof edge and mark any soft wood or uneven runs. During install, we straighten the line so the finished edge looks clean from the street, cap the fascia with custom-bent colour-matched aluminum, and seal key terminations so water stays outside where it belongs.
Our installation process
- Replace rotten or warped sections where needed (before capping).
- Seal exposed wood and cut ends to reduce moisture absorption.
- Custom-bend aluminum capping on site for a snug fit and crisp lines.
- Fasten to structure and seal terminations; coordinate with soffit and eavestroughs.
- Walk the site with you before final cleanup to confirm every detail.
Fascia repair
Over time, leaks, ice, and age can loosen boards or start rot near corners and trough lines. We identify the failing area and re-cap for a tidy, durable result. Isolated damage on one corner or run is often repairable without full-elevation replacement. See the Cost section below for typical planning ranges.
Common fixes
- Replace damaged boards and re-cap in a matching colour.
- Re-fasten loose sections; correct waves and step-downs along the roof edge.
- Seal gaps where water or pests enter; tidy transitions at corners and returns.
- Re-align with soffit and gutter so water flows smoothly into the downspouts.
Simple care tips
- Keep gutters clear so overflow does not soak fascia — or install Alu-Rex gutter guards to reduce maintenance.
- After storms, check for peeling paint, dark stains, or soft spots — especially on north-facing sides where ice dams form.
- Improve attic airflow with vented soffit to reduce ice issues.
Materials and finishes
- Aluminum capping: Low-maintenance, corrosion-resistant, wide colour range (white, charcoal, black, brown, and stone-coordinated finishes).
- Wood replacement (where needed): Exterior-grade lumber, sealed before capping.
- Fasteners and sealants: Exterior-rated products for long life and a clean finish through GTA freeze-thaw cycles.
Typical fascia cost in Mississauga and West GTA
Aluminum fascia is quoted per linear foot of roof edge. Final pricing depends on total footage, height and access, how much wood needs replacement, colour options beyond stock, and whether we coordinate with soffit or gutters. Minimum service call $300 (before HST).
| Configuration | Planning Range | Common Use |
|---|---|---|
| Aluminum cap over existing wood | Often around $8–$12 per linear foot installed | Sound underlying wood, mostly cosmetic refresh, eliminate painting cycle |
| Full fascia replacement + aluminum wrap | Often around $10–$15 per linear foot installed | Rot repair, warped or missing sections, older homes needing full board replacement |
Reference project totals
- Isolated fascia repair (one corner or a single run): often $400–$900 per incident
- Full-elevation fascia replacement or re-capping (2-storey detached): often $2,200–$4,800
- Soffit + fascia bundle (full home, most common pairing): often $3,500–$8,500
- Full exterior refresh (soffit + fascia + eavestrough + downspouts + cladding): often $14,000–$28,000+
These are planning ranges only. Final pricing depends on measured linear footage, height, wood condition, colour beyond stock, and the approved project scope. Every project includes a clear, written estimate with itemized scope and manufacturer material warranty coverage.
What affects pricing most
- Total footage: More linear footage means more material and bending time.
- Height and access: Second-storey work, steep grades, and tight access can add labour.
- Wood condition: The more rot we replace, the more time the prep takes.
- Coordination: Bundling fascia with soffit or eavestrough changes can reduce repeat setup.
Fascia Installation Across the West GTA
We install and repair fascia across the West GTA. For city-specific information, visit:
- Fascia installation in Mississauga — our home base
- Fascia installation in Oakville — heritage districts, executive homes, Old Oakville
- Fascia installation in Burlington — Aldershot, Tyandaga, Roseland escarpment
- Fascia installation in Brampton — Southfields, Mount Pleasant, Heart Lake
- Fascia installation in Milton — Beaty, Scott, Willmott, Harrison, Ford
- Fascia installation in Etobicoke — Mimico, Long Branch lakefront, narrow-lot logistics
- Fascia installation in Vaughan — Woodbridge, Maple, Kleinburg, Upper Thornhill
- Fascia installation in North York
- Fascia installation in Caledon — Bolton and surrounding areas
- Fascia installation in Georgetown
Not sure if we cover your area? Send the address with your request and we’ll confirm.
Why West GTA homeowners choose Maxima Aluminum LTD
- Mississauga-based exterior aluminum contractor since 2002, serving homeowners across Mississauga, Oakville, Burlington, Brampton, Milton, Vaughan, Etobicoke, North York, Caledon, and Georgetown.
- Public reputation: 500+ public customer reviews and ratings, including 420+ HomeStars reviews and 132+ Google reviews as of July 2026.
- Recognized trust signals: HomeStars Verified, BBB A+ Accredited, ALU-REX Elite Installer, WSIB-compliant, and general liability insured.
- One team, one system: Fascia, soffit, gutters, and cladding installed to work together as a coordinated roof-edge assembly.
- Clear written quotes: Itemized scope, materials, colours, warranty notes, and optional upgrades explained before work begins.
What West GTA homeowners say about our fascia work
Selected reviews from Google and HomeStars from customers who had fascia installation, repair, or re-capping work completed by Maxima Aluminum LTD. Read more customer reviews.
★★★★★ 5 out of 5
“Stas recommended the best drainage option. They even found a problem with our fascia that another contractor had covered up, and fixed it before installing the new eavestroughs. Highly recommend.”
★★★★★ 5 out of 5
“Maxima Aluminum did a wonderful job installing new soffit, fascia and eavestroughs on our two-storey home. Workmanship was excellent and the site was left spotless.”
★★★★★ 5 out of 5
“We had Maxima Aluminium replace our eavestrough, soffit, fascia and downspouts after a difficult experience with another company. The difference was night and day — professional, thorough, excellent workmanship.”
★★★★★ 5 out of 5
“Our house looks brand new. The team installed all new aluminum soffit, fascia panels, eavestroughs and downspouts. They consulted us on the best location for downspouts. So pleased with the results.”
Frequently Asked Questions About Fascia
Pricing and scope
How much does fascia replacement or re-capping cost in Mississauga and West GTA?
Aluminum fascia is quoted per linear foot. Aluminum cap over existing wood is often around $8–$12/lf. Full fascia replacement with aluminum wrap and rot repair is often around $10–$15/lf. Reference project totals: isolated repair often $400–$900, full-elevation replacement often $2,200–$4,800, soffit + fascia bundle often $3,500–$8,500. See the Cost section for full detail.
Do I need to replace all my fascia, or can you repair sections?
Targeted repairs are possible when the remaining fascia stays solid. Widespread rot, multiple existing patches, or 15+ year-old wood usually makes full replacement the smarter long-term value. During the on-site visit, we show what is worth saving and what should go.
Gutters and coordination
Can you replace fascia without replacing the gutters?
Yes — we can remove and reinstall existing gutters while we repair or re-cap fascia. If gutters are old, leaking, or undersized (common on 15+ year-old GTA homes), replacing them at the same time can save labour and avoid paying twice for access.
What are the signs that my fascia needs attention?
Common signs include peeling paint, dark stains, soft or spongy wood, visible gaps at the roof edge, sagging gutters pulling away from the house, or evidence of animals getting into the attic through the soffit return. If you notice any of these, a quick on-site inspection helps avoid bigger repairs later.
Materials and timing
What materials do you use for fascia work?
Damaged wood is replaced with suitable exterior-grade lumber where required, then capped with custom-bent aluminum that matches the soffit and eavestroughs. Available in white, charcoal, black, brown, and stone-coordinated colours. Cut edges are sealed and exterior-rated fasteners and sealants are used for long life through GTA freeze-thaw cycles.
What areas do you serve?
We install and repair fascia across the West GTA: Mississauga, Oakville, Burlington, Brampton, Milton, Vaughan, Etobicoke, North York, Caledon, and Georgetown.
How long does fascia work usually take?
Many fascia repair or re-capping projects finish in a single working day. Larger homes or jobs combined with soffit or gutter replacement can take 2–3 days. We confirm timing before work begins.
Workmanship and Material Warranty
Qualifying new installation projects may include a 5-year workmanship warranty from Maxima Aluminum LTD when stated in the written agreement. Warranty coverage is non-transferable and applies only to the work specifically included in the approved scope. Repairs, service work, and partial replacements are not automatically covered unless stated in writing. Manufacturer material warranties vary by product, colour, supplier, and quote.
Need fascia installation, re-capping, or repair?
Call 416-677-8191 for Mississauga, Oakville, Milton, Burlington, or Georgetown, or 416-875-6366 for Brampton, Caledon, Vaughan, North York, or Etobicoke.
Ready for a quote?
Tell us about your fascia project — new installation, re-capping, replacement, or a targeted repair. We will review the details, explain the practical options, and provide a clear written estimate after an on-site visit.
- Request an Estimate — fastest path
- Call: 416-677-8191 for Mississauga, Oakville, Milton, Burlington, and Georgetown
- Call: 416-875-6366 for Brampton, Caledon, Vaughan, North York, and Etobicoke
